Magnets that permanently rotate the wind turbine, even in complete apnea, with the benefit of continuous energy production.
Takes advantage of all observed wind speeds since it rotates continuously.

Levitation of the axis and fins that minimizes friction and wear and tear of the axis and the generator by accelerating the rotation of the wings.

A differential between the generator and the shaft, enabling controlled rotation of the blades in strong gusts of wind and reducing torque in the start-up phase.

Technical Characteristics

• Wind turbine 2 kw with an output of 14-16 kw per 24 hours. Dimensions height 1,40 m. and width 1,20 m
• Wind turbine 5 kw with an output of 35-40 kw per 24 hours Dimensions height 2,20m and width 1,90m
• Use of low-speed generator motor max 100 rpm
• Silent
  up to wind force 4: 22dB
  up to wind force 5: 34dB
  up to wind force 6: 48dB
  Suitable for installation inside and outside urban areas
• The height of the wind turbine 2,20 m is similar to the height of a solar water heater.
• The advantage of continuous performance reduces by 50% the number of batteries used for energy storage.
• For the installation of the wind turbine, a surface area of 2 square meters is required.
• It has a 50-watt vertical photovoltaic panel, an independent circuit that supplies sensors, switches, alarm (siren, beacon, lighting) and wifi that notifies the central control system in real time.
• The good operation and safety of the wind turbine is monitored remotely via network 24hours.
• Protective metal mesh to prevent people and pets from approaching
• Brightly colored lines on the blade surface to prevent injury to birds
• IEC 61400 design standard
• NTUA performance measurement certification
• CE – ISO 611851